You can plate them but as I mentioned but the bearings are loose and rattling (that's part of the reason we're changing them to new) and nickel plating them won't solve that problem and could make it worse on the ones that aren't rattling. It's a sealed system so injecting grease is not possible unless someone has a method. David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Ron Nossaman Sent: Saturday, September 15, 2012 7:08 AM To: pianotech at ptg.org Subject: Re: [pianotech] new Steinway casters on old steinway legs On 9/15/2012 8:58 AM, Al Guecia/Allied PianoCraft wrote: > Why not just send the original casters out to be nickeled? Or http://www.caswellplating.com/electroplating-anodizing/nickel-plating-kits/e lectroless-nickel-plating-kits.html Ron O has been electroless nickel plating agraffes and counter bearing bars for some time, to good effect. I don't know why it wouldn't work with casters too. Ron
This PTG archive page provided courtesy of Moy Piano Service, LLC