Ready made Agraffe T-Handle tool made by JAHN Co is sold by Pianoteck.. Works Great.. Schaff still sells Combination tools T-handle. Good Luck! Isaac On Oct 26, 2012, at 1:21 PM, Terry Farrell wrote: > At least ten years ago I bought an agraffe wrench that looks almost > exactly like Ron's. I don't remember exactly where I bought it, but > it had to have been from Schaff, Pianotek or American. > > Terry Farrell > > On Oct 26, 2012, at 2:57 PM, Ron Nossaman wrote: > >> On 10/26/2012 12:49 PM, Paul Mulik wrote: >>> I removed a set of agraffes yesterday with the tool that fits in the >>> combination handle, and it occurred to me that a much better design >>> would have a T-handle at the top that one could turn with both >>> hands, >>> exactly like the wrench that plumbers use to shut off the water at >>> the meter, only smaller. Does anyone know of a source for an agraffe >>> tool like that? >> >> Make one. A cheap 3/8" socket extension, a piece of brass tubing >> (K&S Engineering) from a hobby shop, and some time with a hack saw >> and file. Excellent for removal, but WAY better for installing >> agraffes as you can quickly spin them in and out for trial fitting. >> Ron N >> <Agraffe Wrench 2.jpg> >
This PTG archive page provided courtesy of Moy Piano Service, LLC