Thanks for the speedy reply. Yeah it is off the piano. I've never plated anything before. I'll do as you suggest. On Wed, Nov 14, 2012 at 3:37 PM, Paul McCloud <pmc033 at earthlink.net> wrote: > If it's steel, it will eventually rust to some extent. If there was > paint, I'd at least get some Rustoleum (clear) on it. You could plate it, > assuming it's off the piano. > Paul McCloud > Sandy Ego > > ----- Original Message ----- > From: "Noah Frere" <noahfrere at gmail.com> > To: pianotech at ptg.org > Sent: Wednesday, November 14, 2012 12:27:38 PM > Subject: [pianotech] Pressure Bar > > Hello! I sanded off the paint from a pressure bar (in case that's not the > right word) on an upright (the curved flattish piece that holds down the > strings just above the upper termination point). It is now very attractive, > bright steel. However, will it tarnish quicker if I don't finish it with > lacquer or something before I restring? > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121114/a55e1343/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC