[pianotech] re-fabricating a failed soundboard

[Joe Goss]

Then what causes the panel to fail?
Joe Goss BSMusEd MMusEd RPT
imatunr at srvinet.com
www.mothergoosetools.com
----- Original Message ----- 
From: "Ron Nossaman" <rnossaman at cox.net>
To: <pianotech at ptg.org>
Sent: Monday, May 28, 2012 9:08 AM
Subject: Re: [pianotech] re-fabricating a failed soundboard


> On 5/28/2012 9:09 AM, Joe Goss wrote:
>> Humm,
>> Is it the board that has lost compression or the ribs.
>> Joe Goss BSMusEd MMusEd RPT
> 
> It's the panel.
> Ron N
> 
>