Carlos, It was silicone not Teflon and it must be available somewhere but Protek has seized (or unseized ) the day. Tom Driscoll ----- Original Message ----- From: "Carlos Ralon" <ceralon at comcast.net> To: <pianotech at ptg.org> Sent: Friday, March 30, 2012 6:02 PM Subject: Re: [pianotech] teflon > Is the Liquid Teflon we used to get from Wurlitzer still available, if > so... > where? We used it in mixture with Naptha as CPL for many years? > Carlos Ralon, RPT > > -----Original Message----- > From: atrav27 at att.net [mailto:atrav27 at att.net] > Sent: Friday, March 30, 2012 12:12 PM > To: pianotech at ptg.org > Subject: Re: [pianotech] teflon > > ----- Original Message ----- > From: Heritage Pianos > > A local technician has recently made claims to the contrary and warned > other > members of the local PTG to use Teflon. > > =============== > > Only my opinion here, so completely unofficial. ;o) > > If Teflon is bad, I'm in trouble. I use it for where grease would be too > thick, and where oil would be too thin, where I would prefer something > 'dry' > like places you'd use graphite. IMO it's good for something that is not > going to be touched again in a very long time, some place where I think > oil > would evaporate eventually, and I use it for anti-corrosion with strings > and > such. > > I use DuPont Teflon ChainSaver. It does have solvents, so I usually spray > it > on a q-tip or paper towel first, then wipe. It is very slippery when dry, > but no oily or greasy feel, more like something very polished. I like the > ChainSaver because it has molybdenum too, so that helps keep things > slippery > for a long time (like I wrote, for things that may never be touched again > for years or decades). So, I use it primarily for the rail key pins, for > lube and I see lots of corrosion consistently in the rail pins (I'm in > humid > Florida), and as a wipe on the strings for anti corrosion. It does seem to > provide a real Teflon coating, so good for anti-dust too, once again it's > nice to have a lube that is 'dry' so you don't get dust and dirt sticking > to > it. > > http://www.walmart.com/ip/DuPont-Teflon-Chain-Saver-11-oz/16672659 > > I don't use it for anti-corrosion at the tuning pins because it REALLY is > very thin and slippery when first applied, so I can imagine creating a > loose > tuning pin as a result. It dries in about a minute. Doesn't feel waxy to > me, > but they say once dry you end up with a wax-moly-Teflon coating. > > -Aron- > > PS, for grease, especially for brass (castors and pedals), I prefer > 'SuperLube' synthetic grease. > Doesn't seem to damage/soften wood like petroleum greases, it'll make > leather soft but doesn't seem to damage it. So for the various > combinations > of high clearance pedal parts that combine brass to wood to leather, it > works a treat, and lasts. > http://www.acehardware.com/product/index.jsp?productId=3506761 > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC