Dean These must come from the same supplier as Yamaha. I think I have a decent set identical to these that I can part with for a small (fortune) fee. :) Dale Dale Erwin RPT- Mason & Hamlin/Steinway/U.S pianos Pre-hung Ronsen hammer sets/Abel parts Sitka Soundboards & Supplies WWW.Erwinspiano.com 209-577-8397 -----Original Message----- From: Dean May <deanmay at pianorebuilders.com> To: pianotech <pianotech at ptg.org> Sent: Wed, Mar 28, 2012 5:57 pm Subject: Re: [pianotech] casters Here is what the one I have looks like. Thewheel is 1.75” dia by 1.3” wide. The stem is tapered from .9”to .8” by about 1.5” tall Thanks Dean Dean WMay (812) 235-5272voice and text PianoRebuilders.com (888) DEAN-MAY Terre Haute IN 47802 Give us a LIKE on Facebook! Go to PianoRebuilders.com From:pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Dale Erwin Sent: Wednesday, March 28, 20128:25 PM To: pianotech at ptg.org Subject: Re: [pianotech] casters Dean Do they look like brass Yamaha casters? Dale Erwin RPT- Mason & Hamlin/Steinway/U.S pianos Pre-hung Ronsen hammer sets/Abel parts SitkaSoundboards & Supplies WWW.Erwinspiano.com 209-577-8397 -----OriginalMessage----- From: Dean May <deanmay at pianorebuilders.com> To: pianotech <pianotech at ptg.org> Sent: Wed, Mar 28, 2012 12:59 pm Subject: [pianotech] casters I need 2 casters for a Young Chang G157.Anybody have some left over from setting up a stage dolly? Thanks Dean Dean W May (812) 235-5272voice and text PianoRebuilders.com (888) DEAN-MAY Terre Haute IN 47802 Give us a LIKE on Facebook! Go toPianoRebuilders.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120328/88ffe530/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC