What would the protocol be to assure accurate side to side positioning of the new balance rail hole? Will Truitt -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Jon Page Sent: Friday, July 27, 2012 9:54 PM To: pianotech at ptg.org Subject: Re: [pianotech] balance hole jig Something to keep in mind when repairing balance holes. Not only is the forward and back positioning important, so is side to side. Look how the rear ends of the keys space. Moving the hole left or right will reposition the rear of the key. Michael Morvan pointed this out to me when I had a set of keys which had the shoes reglued less than ideally. -- Regards, Jon Page
This PTG archive page provided courtesy of Moy Piano Service, LLC