[pianotech] Screens under counterbearing bars

[David Love]

It's the counterbearing bar. I'll send a picture later.
David Love
www.davidlovepianos.com
(sent from bb)

-----Original Message-----
From: Ed Foote <a440a at aol.com>
Sender: pianotech-bounces at ptg.org
Date: Tue, 24 Jul 2012 21:10:29 
To: <pianotech at ptg.org>
Reply-To: pianotech at ptg.org
Subject: Re: [pianotech] Screens under counterbearing bars

Hmm,  
   I have taken 76 plates out of Steinways, so far.  I have never seen a screen under a bearing bar.  


Ed Foote RPT
http://www.piano-tuners.org/edfoote/well_tempered_piano.html



-----Original Message-----
From: Delwin D Fandrich <del at fandrichpiano.com>
To: pianotech <pianotech at ptg.org>
Sent: Tue, Jul 24, 2012 8:04 pm
Subject: Re: [pianotech] Screens under counterbearing bars


I have no proof of this but I always assumed it was there to prevent the
thing from buzzing in case of a less than perfect fit. And some of those
castings were considerably less than perfect.

ddf

Delwin D Fandrich
Piano Design & Fabrication
6939 Foothill Court SW, Olympia, Washington 98512 USA
Phone  360.515.0119 — Cell  360.388.6525
del at fandrichpiano.com — ddfandrich at gmail.com

-----Original Message-----
From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf
Of David Love
Sent: Tuesday, July 24, 2012 4:39 PM
To: pianotech at ptg.org
Subject: [pianotech] Screens under counterbearing bars

Does anyone know what purpose (if any) those mesh screens serve that are
under the movable counterbearing bars on older Steinways?  Are they just non
skid surfaces, or do they function as some kind of buzz barrier between the
bars and the plate, or something else I haven't thought of?

David Love
www.davidlovepianos.com




 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120725/b7bce72a/attachment.htm>