Does Spar Varnish ring a bell with anyone? John Ross, Windsor, Nova Scotia On 15-07-2012, at 5:54 PM, Joseph Garrett wrote: > I remember reading on pianotech many moons ago, about a liquid Techs > use when restringing. It make it easier to knock the pins in but then it > sets increasing the torque. As the old search is no longer there and > I can't get my head round the new system. Anyone on here know what it > is called and what is in it > > Thanks > > Barrie, > Essentially, pin driving fluid is nothing more than the base substance for > Varnish, only without all the extra things that make it set up and be a > specific type of varnish. A lot of those things are called "driers". Some > of the added things work against what we want it to do, in this > application. Our goal is to make the tuning pin go into the undersized hole > with the least amount of trauma to the wood. Once the pin is in the wood, > it needs to provide a smooth friction interface between the tuning pin and > the wood. Or to put it another way, to provide a controllable, (if that is > really possible<G>), friction in regards to consistantly drilled holes in > the pinblock material. What we don't want is "poppy" tuning pins. Another > thing that the pin driving fluid does, is to seal the wood, so that it is > less reactive to humidity changes. If regular Varnish is used, (with all > it's extra additives), It's been my experience that the end result will be > inconsistant torque and "poppy" pins. > I used to get my pin driving fluid from Rhodda Paints. They no longer make > Varnish, so they no longer have that particular base in stock. I still have > some. It's almost20 years old. I am noticing a change in its composition > and ability to do what I want it to. I suspect when it goes South, I'll > simply go to the drilling system that Nossaman uses. (with perhaps > something to swab the holes with, which I have not clue what, at this > point.<G>) There other paint manufacturers that still make Varnish. You'll > need to, directly, contact their Laboratory, to get the base substance. > One of those manufacturers is Miller Paints. I'm sure there are others. > Hope that helps. > Joe > > > Joe Garrett, R.P.T. > Captain of the Tool Police > Squares R I > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120715/4451f9af/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC