David, Thanks for the info! I'll take a look at the parts. Regards, Rob McCall McCall Piano Service, LLC www.mccallpiano.com Murrieta, CA 951-698-1875 On Jan 02, 2012, at 16:23 , David Weiss wrote: > Hi Rob, > > I just finished a similar job on a Mason Hamlin console. Beautiful piano on the outside, but it had plastic backchecks, jack flanges, and damper flanges. I was lucky though, about 20 damper levers were intact and I used those as guides. The new damper levers I got from Schaff, and they were an exact match to the originals. The part number is 3786J. > > The advice you has received so far has been great. Just to echo what others have said I strongly recommend doing this job in your shop, and be sure to charge enough, it takes a chunk of time. > > Good luck. > > David Weiss -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120103/b88eb1df/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC