Thanks Isaac, I will get pics to you this week. Rick Ucci Uccipiano.com On Feb 11, 2012, at 10:33 AM, Isaac Sadigursky <irs.pianos at earthlink.net> wrote: > Hi, Rick! > Send me the photo of Console Legs needed,I have a good collection of them and I will try to help you. > For Dale:I have a good collection of Ferrules,square and round ones. > isaac > On Feb 11, 2012, at 5:21 AM, richarducci at comcast.net wrote: > >> I also need legs for a s&c console which are broken at the caster end and cracked at the top. >> These are weight bearing legs. >> I would prefer new similar legs if possible. Does anybody have any contacts? >> >> Rick Ucci >> Uccipiano.com >> >> On Feb 10, 2012, at 8:31 PM, Dale Erwin <erwinspiano at aol.com> wrote: >> >>> Hi Guys and Gals >>> I am looking for a used or new set of BB Mason & Hamlin legs for a 1920s area piano. >>> The ones that came with are really chewed up at the bottom and one is missing the square/tapered brass ferrule/skirt. >>> Write or respond privately. >>> Kind regards >>> Thanks >>> Dale >>> >>> Dale Erwin RPT- >>> Mason & Hamlin/Steinway/U.S pianos >>> Pre-hung Ronsen hammer sets/Abel parts >>> Sitka Soundboards & Supplies >>> WWW.Erwinspiano.com >>> 209-577-8397 >>> >>> >>> >>> >>> >>> >>> -----Original Message----- >>> From: CHARLES BECKER <cbeckercpt at verizon.net> >>> To: PTG <pianotech at ptg.org> >>> Sent: Fri, Feb 3, 2012 4:36 am >>> Subject: [pianotech] archives >>> >>> Is there a simple way to access the archives? >>> >>> >>> thanks > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120211/3b765d5b/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC