Dale, if you don't find the legs for the Mason or you don't want to spend the money, Bondo will do wonders to fix those legs bottoms. I'm sure someone on the list will have the ferrule you need. Al - High Point, NC On Feb 10, 2012, at 8:31 PM, Dale Erwin wrote: > Hi Guys and Gals > I am looking for a used or new set of BB Mason & Hamlin legs for a 1920s area piano. > The ones that came with are really chewed up at the bottom and one is missing the square/tapered brass ferrule/skirt. > Write or respond privately. > Kind regards > Thanks > Dale > > Dale Erwin RPT- > Mason & Hamlin/Steinway/U.S pianos > Pre-hung Ronsen hammer sets/Abel parts > Sitka Soundboards & Supplies > WWW.Erwinspiano.com > 209-577-8397 > > > > > > > -----Original Message----- > From: CHARLES BECKER <cbeckercpt at verizon.net> > To: PTG <pianotech at ptg.org> > Sent: Fri, Feb 3, 2012 4:36 am > Subject: [pianotech] archives > > Is there a simple way to access the archives? > > > thanks -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120211/a2c6d04a/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC