I fitted three sets of Rear Toe casters this afternoon (to three different pianos, I should point out!). The theatre is relocating to a new build, and the pianos will be more mobile in the rooms, instead of standing against the wall.. I had to drill new holes in the sole plates for the front casters, as the toeblocks on the pianos were too narrow to use the existing holes. Why do they make such narrow toeblocks! I'm tired now..... David. www.davidboyce.co.uk -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121206/ec648282/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: Complete.jpg Type: image/jpeg Size: 111401 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121206/ec648282/attachment-0004.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: Drilled.jpg Type: image/jpeg Size: 122558 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121206/ec648282/attachment-0005.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: On front toe.jpg Type: image/jpeg Size: 100525 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121206/ec648282/attachment-0006.jpg> -------------- next part -------------- A non-text attachment was scrubbed... Name: On Tilter.jpg Type: image/jpeg Size: 121178 bytes Desc: not available URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20121206/ec648282/attachment-0007.jpg>
This PTG archive page provided courtesy of Moy Piano Service, LLC