Impact screwdriver. -- John Formsma, RPT Blue Mountain, MS On Thu, Aug 30, 2012 at 11:23 AM, Marshall Gisondi <pianotune05 at hotmail.com>wrote: > Hi Everyone, > I had a quick question. What is the best way to free up tight pressure bar > screws? I'm dismantling this old piano my brother had, an old cable Nelson > player to be exact. The pressure bar screws are tight tight tight won't > budge. My screw driver just cuts up the crew head. Unfortunately I don't > have electric that far out in the yard well it's more like a drive way in > our duplex we rent. I do have a 3/8 drill I believe black and decker. If I > couldget a cord long enough out there would that free it up or is there > somethign I can appy to it to free it up. It is one frozen screw. I put > all mof my 189lbs into it and it won't budge, and I've done physical work > most of my life. Thanks everyone > Marshall > 215-510-9400 > http://www.phillytuner.com > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120830/d8514eda/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC