Yup. Original bridge mounted on soundboard - as it was 145 years ago! Terry Farrell On Aug 11, 2012, at 7:37 PM, John Ross wrote: > Is the bridge mounted? > If it isn't, drill from below, and punch out with an appropriate size pin punch. > John Ross > Windsor, Nova Scotia > On 11-08-2012, at 8:09 PM, Terry Farrell <mfarrel2 at tampabay.rr.com> wrote: > >> Ummmm, a "friend" asked me to pose the question: How best to extract a broken drill bit from a bridge pin hole? The top (broken end) of the bit is about 1/8" below the top of the bridge. Any suggestions short of gouging out a hunk of bridge? >> >> If I get a good suggestion, I'll pass it on to my "friend". ;-( >> >> Thanks! >> >> Terry Farrell > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120811/d2a1ee8d/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC