On 8/10/2012 10:13 AM, John Formsma wrote: > What I do is set the fall board back in place as if it were extended all > the way (as in over the key tops). That way it gets set in the right > position. It's resting, so you don't have to hold it in place with you > hands, belt, or belly. Then attach one side with the screws (the > "adjustable" screw slot first, then the one with the one screw hole). > Then do the other side the same way. > > Never needed more than two hands for this. Two is plenty, but as I recall, it does help to take those guides off of the case sides. Sometimes I'm not sure if I'm confused. How can you tell what you don't remember? <G> Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC