The top and bottom shoulder ends are not symmetrical or 'equally spaced'? Lim On 12-Apr-2012 9:03 PM, "Ron Nossaman" <rnossaman at cox.net> wrote: On 4/12/2012 7:48 AM, lim hock seng wrote: > And you were right, these are > SnS 'M' hammers. I th... Nope, those are production. They had a little dedicated drill setup that drilled two holes at once through the hammer, and the wires were inserted and twisted by hand. Ron N -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120412/9b578143/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC