Thanks Dave, I ended up using a needle nose mini vise grip. Took off the stack and held each key while turning the backcheck . Gave me a chance to vacuum up debris and polish capstans. Rick Ucci Uccipiano.com On Apr 11, 2012, at 12:10 PM, David Renaud <drjazzca at gmail.com> wrote: > Schaff #70. Back check remover. > > > > Sent from my iPad > > On 2012-04-11, at 9:42 AM, richarducci at comcast.net wrote: > >> Can't find it at Schaff or Pianotek >> >> Rick Ucci >> Uccipiano.com >> >> On Apr 11, 2012, at 8:30 AM, David Renaud <drjazzca at gmail.com> wrote: >> >>> The wires are threaded. >>> ....and soft metal to facilitate adjustment. >>> Don't stress them in 101 directions attempting to pull and/or tap. >>> There is a specific tool for this..... >>> >>> Dave Renaud >>> >>> Sent from my iPad >>> >>> On 2012-04-11, at 8:01 AM, richarducci at comcast.net wrote: >>> >>>> List, >>>> Screw on and off or pull off and tap down? >>>> >>>> Rick Ucci >>>> Uccipiano.com
This PTG archive page provided courtesy of Moy Piano Service, LLC