[pianotech] 1st time -SnS brass flange

[Ed Foote]

the pinning is happening in the felt bushings, so pin normally.  The only difference is that the pin is held by brass instead of wood. 


Ed Foote RPT
http://www.piano-tuners.org/edfoote/index.html



-----Original Message-----
From: lim hock seng <limhseng at gmail.com>
To: pianotech <pianotech at ptg.org>
Sent: Fri, Apr 6, 2012 8:58 am
Subject: [pianotech] 1st time -SnS brass flange


Hi,
My 1st encounter with the brass flange on a SnS '40' upright. Its a little sluggish on the last 2 octaves. Questions:
1. What would be the normal number of swings for these kind of flanges?
2. Are repinning steps the same for wooden flanges?
Thanks!
Lim 
 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20120406/603ed920/attachment.htm>