Ed Instead of taking the shank out of the butt, why don't you just send the whole thing, butt, shank and hammer? Wim -----Original Message----- From: Ed Carwithen <edwcarw at yahoo.com> To: Piano List <pianotech at ptg.org> Sent: Sat, Oct 1, 2011 10:07 am Subject: [pianotech] hammer removal I need to replace the hammers on an upright piano. Schaff wants the sample hammers with the shaft attached. No matter what kind of solvent I have tried the shaft stays fimly in the butt, and comes out of the hammer. Yes, I am using the right hammer/butt extractor. Yes, I have removed the glue collar around the shaft on the butt end. I have tried the wall paper paste solvent, glue remover and acetone. No cigar! What will actually dissolve the old glue? Any Ideas????? Ed Carwithen John Day, OR -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20111001/315cbfb1/attachment-0004.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC