I distinctly remember Yamaha's like this produced a loud BONG sound upon loud playing that was coming from the stop rail between the dampers and the hammers. From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Patrick C. Poulson Sent: Tuesday, November 29, 2011 8:08 PM To: pianotech at ptg.org Subject: Re: [pianotech] Yamaha p22 I seem to recall working on a P22 a long ways back that had excessive ringing such as described, and I finally traced it to a very active rear waste section, that part between the hitch pins and the bridge. Normally this area isn't a problem, but on this piano I had to insert stringing braid to quiet it down. Patrick C. Poulson Registered Piano Technician 530-265-1983 -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20111129/dc502881/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC