Lim 1. When putting the action back in the piano it is advised that just before the action is getting to the dampers, which is also the time the back of the keys move over the plungers of the piano disc, that you press all the keys down. The easiest way to do this is to take the front rail, lay it on the keys so that it hits the sharps and white keys at the same time, and press the keys down. This raises the backs of all the keys to allow them to clear the plungers. 2. If the player system was set up correctly at the factory, or by whomever installed the disc system, there is nothing you need to do to "set it up". It should be ready to play when you turn it on. Willem Blees, RPT Hawaii -----Original Message----- From: lim hock seng <limhseng at gmail.com> To: pianotech <pianotech at ptg.org> Sent: Sat, Nov 12, 2011 1:48 pm Subject: Re: [pianotech] SnS 'B'Pianodisc opus 7 help Hi List, Please advise as I will prepping a brand new B model with pianodisc. 1. Is there any precautions to take note of when removing and putting back the action ? 2. The player system-is it difficult to set up? Many thanks! Lim -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20111112/8a3f18a3/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC