Good idea Isaac, thank you. Gary On 6/8/2011 9:42 PM, Isaac Sadigursky wrote: > > > Begin forwarded message: > >> *From: *Isaac Sadigursky <isaacspianoservice at gmail.com >> <mailto:isaacspianoservice at gmail.com>> >> *Date: *June 8, 2011 7:40:40 PM PDT >> *To: *Isaac Sadigursky <irs.pianos at earthlink.net >> <mailto:irs.pianos at earthlink.net>> >> *Subject: **Re: [pianotech] lyre bolts* >> >> Hi, Gary! >> I will also suggest to have a few extra pair of FLAT and LOCK Washers >> of appropriate diameter. >> In case the replacement bolt is a little too long , comes through the >> keybed and interferes with shifting-install washers as needed. >> I have a few extra pairs of original Mason-Hamlin 'Butterfly" or >> "Wing' bolts and from different periods they come in slightly >> different lengh to acommodate different thickness of the Keybed. >> Good luck! >> isaac >> On Jun 8, 2011, at 8:17 AM, Roger at Integra.net >> <mailto:Roger at Integra.net> wrote: >> >>> Gary, >>> Take the following and you will be almost certain to have the >>> correct bolt: >>> >>> 3/8" x 16 >>> 1/2" x 20 >>> 1/2" x 13 >>> Mark, >>> I believe you are in error. In all my research, I haven't come >>> across a 3/4" diameter bolt for a lyre. It's incredibly big. Did you >>> mean 1/2"? >>> >>> Roger Gable >>> Gable Piano >>> Moondog Mfg. >>> >>> ----- Original Message ----- From: "Gary" <gmcc at charter.net >>> <mailto:gmcc at charter.net>> >>> To: <pianotech at ptg.org <mailto:pianotech at ptg.org>> >>> Sent: Tuesday, June 07, 2011 7:13 PM >>> Subject: [pianotech] lyre bolts >>> >>> >>>> Going to tune a Mason & Hamlin grand Thursday and the bolts to >>>> attach the lyre were lost. Anyone know the size, or maybe suggest a >>>> range of sizes to take with me? I don't know if it's the original >>>> M&H or the Aeolian. >>>> Thanks for any help. >>>> Gary >>>> >>> >> > -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110609/eb1ecc6b/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC