Roger: Also, if it is a new production M&H it has an odd length! I had to order two from "Fastenal" to replace some that some movers lost. I think they were 2-3/4" long. No one around here had them in stock. dp -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Mark S Burgett Sent: Wednesday, June 08, 2011 2:44 PM To: pianotech at ptg.org Subject: Re: [pianotech] lyre bolts Roger, Sorry, I was thinking of the wrench size. Oops! Mark -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org]On Behalf Of Roger at Integra.net Sent: Wednesday, June 08, 2011 8:18 AM To: pianotech at ptg.org Subject: Re: [pianotech] lyre bolts Gary, Take the following and you will be almost certain to have the correct bolt: 3/8" x 16 1/2" x 20 1/2" x 13 Mark, I believe you are in error. In all my research, I haven't come across a 3/4" diameter bolt for a lyre. It's incredibly big. Did you mean 1/2"? Roger Gable Gable Piano Moondog Mfg. ----- Original Message ----- From: "Gary" <gmcc at charter.net> To: <pianotech at ptg.org> Sent: Tuesday, June 07, 2011 7:13 PM Subject: [pianotech] lyre bolts > Going to tune a Mason & Hamlin grand Thursday and the bolts to attach the > lyre were lost. Anyone know the size, or maybe suggest a > range of sizes to take with me? I don't know if it's the original M&H or > the Aeolian. > Thanks for any help. > Gary > >
This PTG archive page provided courtesy of Moy Piano Service, LLC