On 7/2/2011 1:19 PM, Dale Probst wrote: > Hi Dale, > Sorry, here's the deal: hitch pin next to treble strut broke flush > with plate on second chip session. Drove the remnant through plate but > there is insufficient clearance between the bottom of the plate and > the top of the soundboard for the the remnant of the hitch pin to > clear. I'd like to get that remnant out with out pulling the plate if > possible- piano is strung and chipped. And ideas? Sure, do what one well known east coast manufacturer has done. Hammer that sucker into the soundboard, and then knock it loose with a soundboard steel, or something else that will get to it. No one is ever going to see that dent in the board, will they? Ed Foote RPT -------------- next part -------------- An HTML attachment was scrubbed... URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110702/8e7fb994/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC