A guy who glues up soundboard panels on a regular basis - does he have edge glueing equipment? Edge gluing - like this? -------------- next part -------------- A non-text attachment was scrubbed... Name: DSCN3761.jpg Type: image/jpeg Size: 126287 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110218/fe98e6ca/attachment-0003.jpg> -------------- next part -------------- With equipment - like this? -------------- next part -------------- A non-text attachment was scrubbed... Name: DSCN3733.jpg Type: image/jpeg Size: 124112 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110218/fe98e6ca/attachment-0004.jpg> -------------- next part -------------- To make things - like these? -------------- next part -------------- A non-text attachment was scrubbed... Name: DSCN3765.jpg Type: image/jpeg Size: 119965 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20110218/fe98e6ca/attachment-0005.jpg> -------------- next part -------------- Sorry Wim. And here I thought me and my work might be famous! Fame can be fleeting I suppose. Not to worry, I forget who is who and who does what sort of specialty all the time. And like someone else said, bottom board, not knee board. I thought those terms were pretty universal and concrete - unlike amplify and transduce...... ;-) Terry Farrell On Feb 17, 2011, at 8:44 PM, Wim Blees wrote: > Terry > > If you have the maple, and the equipment to do edge glueing, I would > suggest that. You will, however, have to cover the finished panel > with veneer, the same wood as the rest of the piano. > > Wim
This PTG archive page provided courtesy of Moy Piano Service, LLC