Keith, et al, I'm wondering if applying the CA glue while the string is lifted away from the bridge would improve the results. Might the glue have a greater ability to completely surround the pin if there is no side pressure on the pin? Roger Gable ----- Original Message ----- From: "Mr. Mac's" <tune-repair at allegiance.tv> To: <pianotech at ptg.org> Sent: Saturday, February 05, 2011 11:04 AM Subject: Re: [pianotech] Bridge pin locations help (image oops) > > On Feb 4, 2011, at 3:09 PM, Mr. Mac's wrote: > >> I won't hesitate to share a Eureka moment for you and the List >> when I have it. Won't that be great just to have one. > > Well, Folks, > > I couldn't wait to implement all that has been shared > on this particular issue. So many thoughtful and excellent ideas. > > So, I went to the Steinway Concert Grand piano > and had the proceedings video taped. > > Here are the links for your viewing pleasure: > http://pianostuff.kamcam.com/techgoodies/video/hp.html > http://pianostuff.kamcam.com/techgoodies/video/falsebeat.html > > I was somewhat surprised at the outcome. Maybe you will be as well. > > Any further input is truly welcome. > > Sincerely, > > Keith McGavern, RPT > pianostuff.kamcam.com > > > >
This PTG archive page provided courtesy of Moy Piano Service, LLC