[pianotech] Multifunction tool

[Wesley Hardman]

I want to thank Ron, as well, for the suggestion regarding the above named
tool.  I did not own one until now.  It was a fabulous deal.

Wesley Hardman
Scottsboro, Alabama

On Sat, Aug 20, 2011 at 2:09 PM, Joseph Garrett <joegarrett at earthlink.net>wrote:

> Just want to thank Ron Nossaman for the great suggestion regarding above
> named tool. I got one when they were having a "super sale" and it's been
> setting on the shelf, (for many months)<G>.
> I'm just finishing up a Square Grand Action job and used it for trimming
> the shank ends. Wow! That's slicker'n vaseline on a plastic bar stool! Took
> about 10 minutes all told. No trauma to the fragile hammer butts/pin
> flanges that I could tell. Just a slight buzz. That job has always been a
> delicate procedure, in the past. Not anymore. It took me longer to track
> down all of the wayward shank ends, than it did to cut them off! Many
> thanks Ron.
> Best,
> Joe
>
>
> Joe Garrett, R.P.T.
> Captain of the Tool Police
> Squares R I
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://www.moypiano.com/ptg/pianotech.php/attachments/20110820/eb8720fd/attachment.htm>