On 4/26/2011 1:07 PM, Daniel Carlton wrote: > /My next choice would be burnt shellac. > > / > /Really now?! I've wondered about shellac as an adhesive. Where all can > it be used?/ It's just a thick shellac mix. It was commonly used in players, sealing the porosity of wooden parts and sealing wood to metal parts that were screwed together. It doesn't have the strength of Titebond or hide glue, but is good for low stress uses where wood glues won't stick well. I use it for not only player work, but gluing felt on plates, and bedding counter bearing bars (if I don't pin them) so they are less likely to shift around chipping strings up to pitch. It'll glue a leather pad to a shift lever too. I keep a squeeze bottle of the stuff in the shop, and find I use it far more than I would have expected. It's about time again for someone to post about a soundboard decal curling up and touching the strings, asking what to glue it down with. This'll work for that too. Ron N
This PTG archive page provided courtesy of Moy Piano Service, LLC