Thanks Mark Lim Ron and anyone else who might have responded. My question is however. if the bracket is unable to move while the pin is in the hole will that inpeed the fall board from moving back out of the way of the keys? The key cover needs to slide back out of position. For some reason the pin keeps popping out of the hole as if it doesnt fit snug enough in the hole and at the same time can allow the key cover to move. Will epox y allow it to move? As for soudering, I unfortunately don't have an iron. How does soudering keep the pin in the hole? Thanks again. Marshall Marshall Gisondi Piano Technician Marshall's Piano Service pianotune05 at hotmail.com 215-510-9400 www.phillytuner.com Graduate of The School of Piano Technology for the Blind www.pianotuningschool.org Vancouver, WA -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100902/8e01f73b/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC