Ryan, until it bottoms out Is this what you meant by making sure that, "...all the bridge pins are seated"? And if so, is that what Kent Webb's protocol is for Steinways? Thanks, Alan Eder -----Original Message----- From: Terry Farrell <mfarrel2 at tampabay.rr.com> To: pianotech <pianotech at ptg.org> Sent: Thu, Oct 28, 2010 8:31 am Subject: Re: [pianotech] Steinway M ballpark value I hope no one tries to tap in one of my bridge pins or Ron N's until it bottoms out........ :-( Terry Farrell On Oct 28, 2010, at 11:31 AM, Ryan Sowers wrote: > SNIP > > Before checking sustain on the piano make sure all the bridge pins > are seated - this sometimes makes a huge difference. > SNIP > -- > Ryan Sowers, RPT -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101028/4df05d67/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC