How 'bout when the wax in right in the middle of the lid of a nice Baldwin grand in satin ebony lacquer - big 'ole wad of candle wax......? Terry Farrell On Nov 15, 2010, at 1:30 PM, William Monroe wrote: > Dittos to both. Freeze the keys and it should mostly come off, then > scrape (I would probably use a medium thickness card scraper) then > sand/buff with compounds as necessary to remove any scratches. > > William R. Monroe > > > On Mon, Nov 15, 2010 at 11:11 AM, John Ross <jrpiano at eastlink.ca> > wrote: > I wouldn't use heat to melt it, that would cause the wax to migrate > into the key further. > Just use a razor blade, and scrape. > John Ross > Windsor, Nova Scotia > > On 2010-11-15, at 10:35 AM, toddpianoworks at att.net wrote: > >> Hey everyone, >> >> I've got a client who's spilled candle wax on their keys and didn't >> notice it before it hardened. >> >> I'll be going over later, but I wanted to see if anyone has had a >> similiar scenario. >> >> I was going to lightly run a lighter over to melt the wax on the >> tops of the keys. Then remove those keys and take a sharp chisel to >> the keysticks/frame/bed and just replace the punchings. >> >> Does anyone have any other ideas? >> >> Thanks! >> Matthew >> Sent from my Verizon Wireless BlackBerry >> > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101115/fe6e9692/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC