Only if they are designed to be mixed 1:1. Epoxy formulation has become rather sophisticated over the years. Epoxies are now available for many different and specific applications. The epoxy I'm using right now is designed to be mixed at a 1:3 ratio. I've used other epoxies that were designed to be mixed at a 1:5 ratio. Best advice I can give on epoxies is to find a manufacturer you like (or whose products are readily available to you) and stick with it. Learn its characteristics and how best to work with it. Most of the major brands formulated for use with wood (look for suppliers to the wooden boat industry) are excellent. Most of them also have handbooks available to teach you how best to work with their products. ddf Delwin D Fandrich Piano Design & Fabrication 620 South Tower Avenue Centralia, Washington 98531 USA del at fandrichpiano.com ddfandrich at gmail.com Phone 360.736.7563 -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of johnparham at piano88.com Sent: Friday, November 12, 2010 7:01 PM To: pianotech at ptg.org Subject: Re: [pianotech] epoxy problems - was green piano ***THE FIX! because the epoxy is chemically the same as the 1-1, you can put the 1-1 mix into the joint and the re-glue will work very very well.*** Mark, If I understand you correctly, you are saying that epoxies that are mixed 1-1 produce stronger bonds, right? -John Parham
This PTG archive page provided courtesy of Moy Piano Service, LLC