I sent this thru long ago & it didn't show up so here it is again Dear woodchucks How about some piano related banter. I finally bit the bullet and bought a new Shelix indexable carbide tip super duper cutter head for my 20 inch planner and 8 "jointer. The jointer cut the first pass of a maple block 3 inches wide that was smooth as a babys bottom, silk blanket....etc The planner head is a wicked looking device. Like something used for torture. Each squarish cutter bit has four sides of carbide. If one or more gets nick loosen the screw and rotate the numbered head to a new clean fresh razor edge. I got these heads from grizzly. The Shelix is made in ....THE U.S.A.....by American craftsman...Ta dum.!!! The other one in chermany....by German craftsman. The other really cool feature is the noise level drops by at least half. I'd say with the jointer...2/3thds. Big plus in the shop. Dale S. Erwin www.Erwinspiano.com Custom piano restoration Ronsen piano hammers-sales R & D and tech support Sitka soundboard panels 209-577-8397 209-985-0990 = -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101102/795c8ff0/attachment-0001.htm> -------------- next part -------------- A non-text attachment was scrubbed... Name: Jointer_rotary_cutter_head.JPG Type: image/jpeg Size: 259323 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101102/795c8ff0/attachment-0002.jpeg> -------------- next part -------------- A non-text attachment was scrubbed... Name: Shelix cutter-1.JPG Type: image/jpeg Size: 102723 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101102/795c8ff0/attachment-0003.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC