Three to four millimeters doesn't give you enough pin to get a good pair of vice grips on? Did you try turning the piano over and shaking? ;-) Terry Farrell On Nov 2, 2010, at 4:45 PM, Paul T Williams wrote: > OK all junk aside from my and a lot of past posts...This is not > OT!! :>) > > > I'm working on a Baldwin R from the 60's. (pre hitch pin weird > thing) Why did they bury the bridge pins down so far? To restring > a piano on these is a bear of a task! Only 3-4 millemeters (or > millemetres for you northerners). They give you nothing to grab > when trying to pull the pins out! I have about 20 of these beasties > at UNL and I hate them for restringing or bridge fixing. > > What have you done with these? > > Thanks > Paul > > > > From: Paul T Williams <pwilliams4 at unlnotes.unl.edu> > To: pianotech at ptg.org > Date: 11/02/2010 03:38 PM > Subject: Re: [pianotech] Medical costs (OT!) was:billing > dilemmawith pitch raises > > > > > I guess I'll whine at them, then. And I will, but not as much to > those that didn't bother to vote at all! They have NO say. > Paul > > > From: Duaine Hechler <dahechler at att.net> > To: pianotech at ptg.org > Date: 11/02/2010 03:21 PM > Subject: Re: [pianotech] Medical costs (OT!) was:billing > dilemmawith pitch raises > > > > > > Only, if you know some people that didn't voter your way. > > Paul T Williams wrote: > > Voted just now! And proud of it. So...can I bitch now when my people > > don't get elected? > > > > Paul > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20101102/dcbd4ec3/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC