Breaking them loose as Ed mentioned works well but you'll also need to chisel out some. Make new rails and screw them in instead of gluing. A much easier fastening system and the screws add support. Attached is a photo of a rail at a school. It also has a support rail below. I made a few of these lower support rails for pianos at the school because in winter the desks would drop down in between the glide rails. -- Regards, Jon Page -------------- next part -------------- A non-text attachment was scrubbed... Name: Desk3.jpg Type: application/octet-stream Size: 78628 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100526/ac16bfc5/attachment-0002.obj> -------------- next part -------------- A non-text attachment was scrubbed... Name: Desk2.jpg Type: application/octet-stream Size: 38783 bytes Desc: not available URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100526/ac16bfc5/attachment-0003.obj>
This PTG archive page provided courtesy of Moy Piano Service, LLC