Hi,Nick! I have some parts and I can guide to where to get more of the missing parts and how to make some yourself.. Call me tomorrow on my cell 818-599-9839.. good luck Isaac On May 20, 2010, at 1:00 PM, Nicholas Gravagne wrote: > Hello List, > > Long story, but I am rebuilding an old Boston Mason & Hamlin > (#35000) BB. Some parts never arrived with the piano. > > See photos. > > Pedals are missing along with mounting blocks. One block (#4) is in > the pedal box and can be used as a guide to make others. Also, no > lyre support rods. > > Cheek block hardware is missing: brass action guides along with the > upright brass pieces that hold the fallboard. > > Also could use a new sostenuto rod and linkages. We do have the sos > support studs which attach to the belly block. Also could use damper > up-stop rails, though we can make these if we have to. But it would > help to know what the original dimensions were. > > Any referrals, or tracings, or advice as to how to otherwise proceed > would be appreciated. > > Issac, my old friend, are you reading this? > > Thanks and Cheers > > Nick G > > -- > Nick Gravagne, RPT > AST Mechanical Engineering > <MH_PedBox.JPG><MH_CheekBlks.JPG>
This PTG archive page provided courtesy of Moy Piano Service, LLC