[pianotech] Keyslip photo1

["Rafael M. Huberman Muñiz"]

David,
Yes I did. It holds the entire keybed.

Rafael H.

On 19/05/2010, at 01:32 p.m., David Ilvedson wrote:

In photo #1 there's the piece the cheekblock is screwed into...the  
screws going into the side of case are evident...you haven't removed  
that piece?

David Ilvedson, RPT
Pacifica, CA  94044

----- Original message ----------------------------------------
From: " Rafael M. Huberman Muñiz " <rafahuberman at prodigy.net.mx>
To: pianotech at ptg.org
Received: 5/19/2010 8:02:51 AM
Subject: [pianotech] Keyslip photo1


> Hi list, here are The photos of The Yamaha. You can see The block that
> hold the keybed and there no screws holding The keyslip.
> Rafael Huberman




> Enviado desde mi iPhone