Nick Try Tony Geers. There is no e-mail address, but his number is 513-941-7666. Wim -----Original Message----- From: Nicholas Gravagne <ngravagne at gmail.com> To: pianotech <pianotech at ptg.org> Sent: Thu, May 20, 2010 11:03 am Subject: [pianotech] Mason Hamlin Parts Needed Hello List, Long story, but I am rebuilding an old Boston Mason & Hamlin (#35000) BB. Some parts never arrived with the piano. See photos. Pedals are missing along with mounting blocks. One block (#4) is in the pedal box and can be used as a guide to make others. Also, no lyre support rods. Cheek block hardware is missing: brass action guides along with the upright brass pieces that hold the fallboard. Also could use a new sostenuto rod and linkages. We do have the sos support studs which attach to the belly block. Also could use damper up-stop rails, though we can make these if we have to. But it would help to know what the original dimensions were. Any referrals, or tracings, or advice as to how to otherwise proceed would be appreciated. Issac, my old friend, are you reading this? Thanks and Cheers Nick G -- Nick Gravagne, RPT AST Mechanical Engineering -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100520/8b7730bb/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC