[pianotech] Creaky damper lift tray

[Tom Driscoll]

Re: [pianotech] Creaky damper lift tray
  Subject: Re: [pianotech] Creaky damper lift tray


    ...had to raise the upstops out of the way , remove the screws that mount the back action to the rear  of the action cavity  and lift - rotate the whole assembly as much as the damper wires would allow without bending.



  To allow the back action to come forwards more easily, remove the damper guide rail screws to allow the rails to move forwards as well.

-- 

  Regards,

  Jon Page

  Good point Jon. On this piano it was not necessary---barely ! I was just glad the dampers didn't have to be removed . 
  Tom D.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100519/642d404a/attachment.htm>