Just looking at your pic... Did you take the cheek blocks out? I've seen pianos that the keyslip was attached pretty solidly to the cheek blocks. If you've done that and there are no screws from the bottom and it's still stuck, is that a rubber grommet on the top of the keyslip? If there's one at both ends, it's possible a screw could hide under those. Good luck, & please post back when you find out. Brian > From: rafahuberman at prodigy.net.mx > To: pianotech at ptg.org > Date: Mon, 17 May 2010 11:54:29 -0500 > Subject: [pianotech] Help urgent 2 > > Hello again! > Here is a picture of The yamaha > > Thanks again > > Rafael HUberman > > _________________________________________________________________ Hotmail is redefining busy with tools for the New Busy. Get more from your inbox. http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_2 -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100517/140753d4/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC