David Ilvedson wrote: The cuts are a beginning mark? You tear the cloth, right? Yes. Al - High Point, NC -------------------------------------------------- From: "David Ilvedson" <ilvey at sbcglobal.net> Sent: Monday, March 22, 2010 5:26 PM To: <pianotech at ptg.org> Subject: Re: [pianotech] Damper guide rail bushing cloth > The cuts are a beginning mark? You tear the cloth, right? > > David Ilvedson, RPT > Pacifica, CA 94044 > > ----- Original message ---------------------------------------- > From: "Al Guecia/AlliedPianoCraft" <AlliedPianoCraft at hotmail.com> > To: pianotech at ptg.org > Received: 3/22/2010 1:53:55 PM > Subject: [pianotech] Damper guide rail bushing cloth > > >>Dear List, > >>I had a good supply of damper rail cloth that I had been using for years. I used the >>last of it, last year. I ordered some new and see it doesn't have the cuts along the >>edge (similar to flange bushing cloth) that my old damper rail bushing cloth had. Can >>anyone give the proper width, to save me some trail and error tears. > >>Al - >>High Point, NC > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100322/4af18b66/attachment-0001.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC