I took a measurement from the pivot point to where it would reach to where the pedal rod would raise it, 8.25" James James Grebe Est. 1962 Piano Tuner-Technician Creator of Custom Caster Cups Creator of fine Writing Instruments Theatre and Theatre Organ Historian www.grebepiano.com 1526 Raspberry Lane Arnold, MO 63010 (314) 608-4137 Become what you believe ----- Original Message ----- From: "Isaac Sadigursky" <irs.pianos at earthlink.net> To: <pianotech at ptg.org> Sent: Friday, March 19, 2010 6:48 PM Subject: Re: [pianotech] Chickering shift mecanism > Hi,James! > Any chance to see the picture underneath the piano?? Model? > I do have about a dozen saved Shift Levers,also,Schaff sells them and > Ramsey Corporation still has Moldings for all Aeolian products and most > USA made pianos.They need 3-4 digit stamped number on the part.. > Good Luck! > isaac > On Mar 19, 2010, at 4:30 AM, James Grebe wrote: > >> Just acquired a 5'1" art deco Chickering grand, 1950, that is missing >> the underpiano part of the shift mechanism for the soft pedal. Would >> anyone have a junked one I could buy? >> thanks, >> James >> James Grebe Est. 1962 >> Piano Tuner-Technician >> Creator of Custom Caster Cups >> Creator of fine Writing Instruments >> Theatre and Theatre Organ Historian >> www.grebepiano.com >> 1526 Raspberry Lane >> Arnold, MO 63010 >> (314) 608-4137 >> Become what you believe >
This PTG archive page provided courtesy of Moy Piano Service, LLC