Hi Mike, I've used the foam baffles a number of times, and I even have them in my piano at home. I would say they probably bring about a 15% reduction in sound. Judy Edwards sells them precut on her web site, and says they give a 30% sound reduction, but that has not been my experience. I purchase mine from a company called Markertek, they call it acoustic foam. . Here's the link; http://audio-video-supply.markertek.com/search?w=acoustic+foam <http://audio-video-supply.markertek.com/search?w=acoustic+foam&asug> &asug=. The foam is inexpensive, and it cuts very easily with an electric carving knife. Perhaps with the foam baffles, room modifications, and regulation you can get the job done. David Weiss From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Mike Kurta Sent: Friday, March 12, 2010 9:00 PM To: Pianotech Subject: [pianotech] Baffling question Hey Gang: I visited a customer today with a Yamaha C3 with DisKlavier. Their complaint is that it is too loud even turned down. I explained that the slate floor and high soaring ceilings don't help and suggested foam baffles. What has been your experience, who sells them, and how are they installed? Thanks for the info, Mike Kurta, RPT Chicago chapter -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100313/3b7e218b/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC