On a B in a piano prof's studio back at UA, I actually super glued little screws to each damper lever. It did the trick and the prof never noticed. Willem (Wim) Blees, RPT Piano Tuner/Technician 94-505 Kealakaa Str. Mililani, Oahu, HI 96789 808-349-2943 www.Bleespiano.com Author of: The Business of Piano Tuning available from Potter Press www.pianotuning.com -----Original Message----- From: Matt Wynne <ptuner at optonline.net> To: ""<pianotech""@ptg.org Sent: Tue, Mar 9, 2010 2:51 pm Subject: [pianotech] grand dampers Hi All: I've ben working on an S&S model M that has had new dampers recently installed. I've tried all of the tricks I know (bending the wire, reinstalling felt, tweaking the strings), but I'm still getting bleed on the bichords. I'm ready to explore adding weight to the dampers levers, but that feels like cheating. Any input from anyone would be greatly appreciated. -Matt -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100309/a9b50671/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC