Mark:
Here is another version of the "Zapper" using two small soldering irons (Radio Shack). You can use a single iron and go in from one side, then the other, but using two cuts the time in half. You will need to use some means of controlling the voltage as the irons get too hot and burn the wood. Harbor Freight has a cheap one or try a dimmer switch of the proper capacity.
Mike Kurta
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100302/bac75cdd/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_2410.JPG
Type: image/jpeg
Size: 67698 bytes
Desc: not available
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100302/bac75cdd/attachment-0003.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_2407.JPG
Type: image/jpeg
Size: 72819 bytes
Desc: not available
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100302/bac75cdd/attachment-0004.jpeg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: IMG_2408.JPG
Type: image/jpeg
Size: 42454 bytes
Desc: not available
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100302/bac75cdd/attachment-0005.jpeg>
This PTG archive page provided courtesy of Moy Piano Service, LLC