It was Paul Revenko Jones. The article begins in the Feb. issue of 2005, page 18 and continues the following month. Alan Eder -----Original Message----- From: Terry Farrell <mfarrel2 at tampabay.rr.com> To: pianotech at ptg.org Sent: Tue, Mar 2, 2010 6:54 am Subject: Re: [pianotech] finishing plates Maybe someone can chime in and identify the issue, but a couple years back someone published an very thorough excellent article in the PTG Journal all about prepping (shaping/polishing) new and used agraffes. I've been following the procedures described in the article and find the results very much worthwhile. Terry Farrell On Mar 2, 2010, at 7:20 AM, reggaepass at aol.com wrote: Al, At what point do you replace agraffes rather than recondition them? And do you use this method on new ones as well as used? Alan Eder -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100302/4c51444d/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC