[pianotech] U1 keyslip

[Tom Driscoll]

Re: [pianotech] U1 keyslipI'm late to this party but if it hasn't been mentioned , remove the keys and examine the slip - keybed for any additional screws. I don't think this model has any such secrets , so a gentle wack from the inside of the slip should free it up .
 Tom Driscoll
   Subject: Re: [pianotech] U1 keyslip


  >... sometimes the finish can stick at both ends. Try gently prying it off from there.


  Or something might have spilled and is gluing the center down.
  A thin blade worked in from the ends might free it.
-- 

  Regards,

  Jon Page
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100626/ec3b2fe9/attachment.htm>