What about using McLube? Les Bartlett Houston What am I missing?" Floyd, Two that I can think of: 1. lubricate the under felt above the pressure bar as well as the pressure bar/capo/agraffes, with LPS-1. Spray some in the cap and apply with a paint brush. It will disapate w/in a few weeks and will not collect dust. 2. check pinblock for separations and tighten ALL bolts. It's obvious that the case is "racking". (at least to me<G>) Hope that helps. Joe Joe Garrett, R.P.T. (Oregon) Captain, Tool Police Squares R I -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ptg.org/pipermail/pianotech.php/attachments/20100613/879428d9/attachment.htm>
This PTG archive page provided courtesy of Moy Piano Service, LLC