The pneumatic clamp hose is about 1.5" or so (I have to measure again) in diameter. So I need something wider than these. David Love www.davidlovepianos.com -----Original Message----- From: pianotech-bounces at ptg.org [mailto:pianotech-bounces at ptg.org] On Behalf Of Duaine Hechler Sent: Friday, June 11, 2010 8:45 PM To: pianotech at ptg.org Subject: Re: [pianotech] Fire hose failure! David Love wrote: > Ribbing a board today I discovered that my pneumatic clamps (firehoses) had > all sprung leaks to the extent that my compressor wouldn't keep quite enough > air pressure (argh). So, while I did fashion a remedy for the short term > I'm shopping to replace the fire hose material with something a bit more > air-o-dynamic. Any suggestions? > > David Love > www.davidlovepianos.com > > > http://www.harborfreight.com/air-tools/air-hoses.html -- Duaine Hechler Piano, Player Piano, Pump Organ Tuning, Servicing & Rebuilding Reed Organ Society Member Florissant, MO 63034 (314) 838-5587 dahechler at att.net www.hechlerpianoandorgan.com -- Home & Business user of Linux - 10 years
This PTG archive page provided courtesy of Moy Piano Service, LLC